Consisting of:

A series of laser-cut, fabricated plates, SHS, and pipes form a skeleton-like open sanitary type design complete with gusseting and mounting. The modular design of the tail and drive end enables to be able to assemble the conveyor on-site in difficult to get to with poor access with ease. It also allows the length of the conveyor to be easy to modify if required. Conveyors can be fitted with an endless food grade belt with optional cleats and centre tracking strip which helps the belt to locate and stay in position or a positive drive arrangement that involves a sprocket-like drive assembly as opposed to a roller type.  The belt will be driven by a SEW geared drive shaft mounted motor via a fixed drive bearing housing assembly and a idler tail end complete with full take-up adjustment and Tripax quick release assembly for ease of cleaning underside of belt and chassis.  The conveyor comes with optional features like a Top hood and under belt covers, discharge guides, chutes, and scrapers for removing sticky products from the belt. This design is fully open and extremely easy to clean down and access the underside of the belt and its forward and return guides, which are all static and don’t require any future maintenance apart from replacement when worn. The guides are manufactured of a very low coefficient of friction material and are long-wearing.  In these photos, a solid Urethane belt is used with a Centre tracking strip and edges